User Instructions

Flash Display Symbols
The top portion of the display contains information relating to the status of the internal radio,
and the options that are set on the flash.
See Section 8 for setting the radio and Section 9 for setting the options.
Note : in some modes the radio mode will be set automatically.
CH – Channel setting of internal radio, 0 through 7
Tx / Rx – Radio set as Transmitter (Tx) for SYNC / LINK / QTTL or Receiver (Rx) for RX
1234 – zones that are turned on. If a zone is off it will be replaced by a “-“
Speaker ON
Reflector type N – normal, D – diffusor / wide angle dome / soft box,
B – bare bulb reflector, T – telephoto
Flash LED indicators ON
Flash ready
Flash compensation set
Page 2
Page 27
MO D
E
/OK
SET
FIRE
OPT
SAVE
RADIO
QTTL
F 5.6
7
FILL +0
ISO 200
N
CH 4 Tx 1234