User's Manual

use this size
4. Options
Press the OPTIONS button to
enter the options set up menu.
To exit the set up menu press
the OPTIONS button again
Use the LEFT (-) Å or RIGHT
(+) Æ arrows to select the option
you want to change.
The two soft keys located on the right side are used to adjust the option
that has been elected.
The RESET soft keys are used to reset the Trio to factory default
settings. Press both at the same time to enter the reset mode.
4.1 Resetting to factory defaults
Press the RESET soft key to
bring up the reset menu
The soft keys of the reset menu perform the following functions
RESET ALL - will restore all the factory settings.
KEEP P1 P8 - will keep your stored Program modes, but reset
everything else to factory settings.
EXIT – will exit the reset menu without changes
7
TEST
OPTIONS
RESET
RESET
+
-
DL F TS
QFLASH PILOT
VER. QF09xxxx
RESET KEEP
ALL P1 P8 EXIT
TEST OPTIONS
+
-