User's Manual

use this size
3. Basic Navigation
3.1 P1-P8
The Pilot can store up to eight of your favorite settings.
Enter the Program mode by pressing the P1-P8 soft key. See section 8
for details on using the program mode.
3.2 SELECT
This soft key selects one of the following :
Mode of Remote 1 / Mode of Remote 2 / Mode of Remote 3
After the mode that you want to change has been highlighted, use the
Left (-) Å and Right (+) Æ buttons to change that mode.
See section 4 for details on choosing the correct mode of the remote
flashes
5
When a selection or setting is highlighted on the display the Left (-) Å
and Right (+) Æ buttons will change that selection or setting. Fo
r
example if the F/number is highlighted then the Left (-) Å and Right (+)
Æ buttons will adjust the F/number up or down.
The TEST button will fire the
remote flashes. An option
allows you to choose whether
the remotes fire all at once, or
sequentially so you can test
individual exposures.
There are four soft keys
located under the
display. The soft keys
select the setting that you
wish to adjust.
Once the setting to be
adjusted is selected use
the Left (-) Å and Right
(+) Æ buttons to change
that selection.
See sections 3.1 - 3.4.
The OPTION button will enter
the options menu. See
section 7 for details on which
options are available.
TEST OPTION
+
-