User's Manual

Select the correct type of Qflash TTL Adapter for your camera, from the list in Appendix D. The “FW” series of TTL adapters
attach to Transmitter FW9T and to the camera hot shoe without cables. The “QF” series and “D” series of TTL Adapters connect
to Transmitter FW9T accessory socket. Mount Transmitter FW9T on a bracket or other location.
Set Transmitter FW9T TTL switch to ON
FreeWire
ON
OFF 1
STATUS
QUANTUM
LOCAL
4
2 3
RELAY
TEST
TM
QUANTUM
OFF
3
12
4RELAY
FreeWire
STATU S
ON
TEST
LOCAL
TM
8.2 Receiver FW8R:
Connect FW31 Accessory Cable between the Receiver FW8R and Qflash Accessory socket. Set Qflash to TTL mode.
Note: Qflash powers FreeWire when it is connected with the QF31 cable. Set the power switch of FreeWire to EXT.
8.3 Connecting a local TTL Qflash to the Transmitter FW9T:
A local Qflash connected to FW9T will sync with the remote flash and will also power the FW9T. Set the power switch of the
FW9T to EXT.
Set Qflash to TTL mode