User's Manual

Set Transmitter FW9T TTL switch to ON.
EXT
SYNC
OUT
ON
7.2 Receiver FW8R set-up
Connect FW31 Accessory Cable between the Receiver FW8R and a Qflash 5d Accessory socket. Set Qflash to TTL mode. Set
Receiver FW8R Range to NORM.
CHANNEL
HI
RANGE
MD
SYNC
OUT
NORM
7.3 Connecting a local Qflash to the Transmitter FW9T:
If you wish to use a local Qflash 5d to fire with the remote Qflash, connect the “Dw” series TTL Adapter to one Qflash Accessory
socket. Connect the FW9T to the other Accessory socket with an FW31 accessory cable.
Set Qflash 5d to QTTL mode. Qflash cannot be turned off with the Local switch on FW9T, however, Qflash 5d can be turned
off by pressing MODE twice. To restart, press any button on Qflash.
8.0 Wireless TTL control for Film Cameras
Receiver FW8R and Transmitter FW9T provide wireless TTL flash capability for film cameras that do not require a pre-flash
pulse. All series of Qflash and all series of TTL adapters can be used. These include Qflash T/X, 2/2d, 4d and 5d series, and TTL
adapter series QF, FW, D, and Dw.
8.1 Transmitter FW9T set-up: