User's Manual

FreeXwire Instructions -- Contents:
Section
1.0 Introduction
2.0 Channel Code and Zone set-up
3.0 Remote Flash set-up
4.0 Remote Shutter set-up (with or without
on-camera flash)
5.0 Mounting FreeXwire
6.0 Qflash T4 Remote Operation
7.0 Wireless TTL and Wireless Auto with Qflash
8.0 Miscellaneous
9.0 FreeXWire Performance Guide
Appendix A Sync-in connections- camera to FreeWire FW9T
Appendix B Sync-out connections- Receiver FW8R to flash
Appendix C Motor Drive cords- Receiver FW8R to camera
Appendix D TTL Wireless Adapters for FreeWire FW9T
Appendix E Miscellaneous connections
Appendix F Specifications
Customer Service
Limited Warranty
Included with FreeXwire model FW8R:
Pole mounting kit, 2x AAA batteries, Instructions, Hook and loop mounting pads
Included with FreeXwire model FW9T:
2x AAA batteries, Sync-in cord, Instructions
All specifications and features are subject to change, updating, and improvements.
________________________________________________________________________________
Glossary_________________________________________________________________________
Receiver FW7Q -- a FreeXwire receiver unit dedicated for Qflash model T4
Receiver FW8R -- a FreeXwire receiver unit
Transmitter FW9T -- a FreeXwire transmitter unit
Transceiver FW10 -- a FreeXwire transceiver unit (can be set as transmitter or receiver).
Hot Shoe Adapter FW12 -- a FreeXwire hot shoe adapter to mount FW9T on camera shoe
Zones 1, 2, 3, and 4 -- wireless links that can be turned on or off to change lighting and camera activation
Channels 0 thru 7 -- independent channels for separate FreeWire setups operating in the same area
“Local” flash -- a flash close to the camera and connected with a sync cord
“Remote” flash -- a flash at a distance from the camera and wirelessly synchronized