User Manual

15
14
8.0 Wireless TTL control for Film Cameras
4.0 (non pre-flash)
This mode allows a (non pre-ash) TTL camera to control all local and remote Qash
exposures. All series of Qash and all series of TTL adapters can be used,
including QFT, X, T2, X2, T2d, X2d, 4 and 5 series, and TTL adapter series QF, FW,
D, and Dw.
Set all Qashes, on-camera or remote, to TTL mode.
8.1 Transmitter FW9T set-up:
Select the correct type of Qash TTL Adapter for your camera, from the list in
Appendix D or our website.
FW series of TTL adapters attach to Transmitter FW9T and to the camera
hot shoe without cables.
QF series TTL Adapters connect to Transmitter FW9T accessory socket and
require an FW11 Uni-Module.
D or Dw series QTTL adapters connect to Transmitter FW9T and DO NOT
require other accessories.
Set Transmitter FW9T TTL switch to ON. Mount FW9T on a bracket or other
location, or use an FW series Adapter which mounts directly to the camera hot shoe.
9.0 Wireless Auto Mode – for any Qash – without
4.0 TTL Adapters
With today’s complicated camera systems, it is sometimes easier, more reliable and
straightforward to shoot in auto mode rather than TTL. Auto also gives the photog-
rapher the ability to tailor her/his exposures to personal taste or experience.
This mode will give any model of Qash wireless Auto mode control of remote
Qashes. This set up does not require a camera with TTL capability nor a TTL
Adapter, only local and remote Qashes.
9.1 Transmitter FW9T set-up:
Connect an FW31 cable from Transmitter FW9T to Qash. Connect a Sync-in cord
from camera PC nipple to Transmitter FW9T Sync -in. Set the local Qash to Auto
mode.
8.2 Receiver FW8R or FW7Q:
Mount and connect one or more of these receivers as in Section 7.2
8.3 Optional: connect a local Qash to the Transmitter FW9T:
A local Qash connected to FW9T will sync with the remote ash and will also power
the FW9T. Set the power switch of the FW9T to EXT. Set Qash to TTL mode.
FW9T FW9T
FW31
QF, D or Dw
SERIES ADAPTER
FW SERIES
TTL ADAPTERS
SHOE MOUNT
FW9T
FW31
P604A 6/27/07 9:02 PM Page 14