User Manual

19. PRGM Program Mode Operation

The Program mode allows you to store your favorite settings and set-ups

and then quickly recall them just by pressing the soft keys. You can

program up to 8 Qflash set-ups of Manual, Auto, or TTL operation,

including settings for all parameters.

19.1 Saving a set up

When you find a set up you like and want to store it, press the SAVE soft

key. The display will prompt you to determine the program number

(Pnumber) that you want to save the set up as. Use Left (-) Å and Right

(+) Æ buttons to adjust the P number up or down. Once you’ve selected

the P number you want to store the set up as, then press the save soft

key. If you wish to not save the set up, then press the exit soft key.

19.2 Using the program mode.

To enter the program mode, press the MODE button, then press the

PRGM MODE soft key, then press the MODE button again.

The current program number

will be displayed along with the

mode and the settings for that

program.

The soft keys allow you to

change to a different program

number quickly.

You can change the function of

the soft keys by pressing the

Left (-) Å and Right Æ buttons when nothing is highlighted.

The available soft key functions depend on the mode of the program.

Any changes made to the settings of any program are saved to that

program automatically. There is no need to take any action to save the

changes.

To exit the program press the MODE button, then use the Left (-) Å and

Right (+) Æ buttons to select a new mode, then press the MODE button

again.

P1 QTTL FILL +0

F 5.6

ISO 200

P1-P2 P3-P4 P5-P6 P7-P8

MODE

SET

PRGM