User`s guide

Chapter 2 Installing Internal Tape Drives
Connecting a SCSI Cable
DDS-4/DAT 72 User’s Guide 25
Figure 7 Mounting
Holes for the Internal
Tape Drive in a 5.25-
inch Installation
Connecting a SCSI Cable 2
The internal tape drives can be used with two SCSI interfaces:
• Wide SCSI — either Low Voltage Differential (LVD) or Single-ended
(16-bit Wide mode),
• Narrow SCSI — either Low Voltage Differential (LVD) or Single-
ended (8-bit Wide mode).
41.3 mm
(1.63 in)
31.5 mm (1.24 in)
146 mm
(5.75 in)
174.6 mm
(6.87 in)
79.4 mm
(3.13 in)
47.6 mm
(1.87 in)
21.8 mm (0.86 in)
9.9 mm (0.39 in)
16-M3
41.2 mm
(1.62 in)
139.7 mm (5.50 in)
149.1 mm (5.87 in)
Side View
Bottom View
Note: Tolerance for all dimensions is 0.25mm (0.01 in)