User`s guide

Chapter 2 Installing Internal Tape Drives
Reviewing Drive Default Settings
20 DDS-4/DAT 72 User’s Guide
SCSI Wide/Narrow
Configuration
(DDS-4 Drives
Only)
2
Settings:
Switch 9 ON = SCSI Wide Operating Mode (default)
Switch 9 OFF = SCSI Narrow Operating Mode
Switch 9 enables SCSI Wide or Narrow operation. By default, switch 9 is
set to ON, enabling SCSI Wide (16-bit) operation. To enable SCSI Narrow
Novell 4.11 with native backup
using the NWTAPE driver
dated after 11/3/99.
On On On On Off
Novell 5.x with native backup
applet using the
NWTAPE.CDM driver dated
before 11/3/99.
Off On On Off Off
Novell 5.x with native backup
applet using the
NWTAPE.CDM driver dated
after 11/3/99.
On On On On Off
DEC UNIX Off On On On --
Sun UNIX On Off On On --
SGI OnOnOnOn --
HP-UX On On Off On --
IBM AIX On Off On Off --
Linux OnOnOnOn --
SCO (ODT and Open Server)
installation using the MAKDEV
utility.
Off On On Off --
SCO UnixWare 7.x OnOnOnOn --
Switches
Host Operating System SW5 SW6 SW7 SW8 SW10