User`s guide

Chapter 2 Installing Internal Tape Drives
Unpacking
10 DDS-4/DAT 72 User’s Guide
• Recording Drive Information
• Accessing the Inside of Your Computer
• Mounting the Internal Tape Drive
• Connecting a SCSI Cable
• Checking SCSI Termination
• Connecting a Power Cable
• Completing Your Installation
• Registering Your Tape Drive
Unpacking 2
Before you unpack the contents of your drive package, inspect the
shipping containers for damage. If you spot damage to the container,
notify your carrier immediately.
When you unpack the package, compare the items received with those on
the packing list. If any item is missing or damaged, please contact your
place of purchase immediately.
Note: If you have an external drive, refer to Chapter 4 for installation
instructions.
Note: Internal tape drives come in two mounting configurations,
one for 3.5-inch half-height bays and one for 5.25-inch half-
height bays. These two drives are identical, except that the
drive designed for 5.25-inch installations has mounting
brackets on each side of the drive and a different front bezel.