Technical data

DAT 72 (DDS Gen5) 36/72 GBYTE
Loading a cartridge
!
When inserting the magnetic tape cartridge, ensure that the label side is facing up. The
side on which the tape is visible must be on the right.
► Open the drive bay.
► Push the magnetic cartridge into the drive until it is pulled in automatically.
Unloading a cartridge
!
Do not remove the cartridge as long as the DRIVE indicator is lit. This could result in data
loss.
► Push the eject button.
It may take a few seconds until the cartridge is ejected.
► Remove the tape cartridge from the drive.
Emergency unload of magnetic tape cartridge
!
Emergency removal can cause data loss on the cartridge. Only use this procedure if the
cartridge cannot be ejected any other way!
► Press the Eject button for at least five seconds.
The cartridge will be ejected after approx. 40 seconds regardless of its status.
Emergency removal is still possible if the eject button has been disabled with the SCSI command
PREVENT MEDIA REMOVAL.
A26361-H939-Z100-1-7419 English - 21