User manual

Interval Time
The Interval Time Setup Screen is shown below. Use the navigation
buttons to move through the options and press Enter to select.
Interval Time Setup Screen
• Selecting ONE SECOND will display the photo for 1 second before switching
to another photo, during a photo show.
• Selecting THREE, FIVE, TEN SECONDS or THIRTY SECONDS will display
a photo for 3, 5, 10 or 30 seconds before switching to another photo during a photo
show (factory default is 3 seconds)
Transition Setup Page
The Transition Setup Screen is shown below. Use the navigation
buttons to move through the options and press Enter to select.
Transition Setup Screen
• Selecting FULL SCREEN will display the full photo at once. (factory default
mode)
• Selecting the other modes will display the photo using the transition chosen.
The photo transition choices are:
1: Full Screen (at once)
2: Top-to-Bottom (roll)
3: Bottom-to-Top (roll)
4: Top/Bottom-to-Center (roll)
5: Center-to-Top/Bottom (roll)
6: Top-to-Bottom (blind)
7: Left-to-Right (roll)
8: Right-to-Left (roll)
9:
Left/Right-to-Center (roll)
10: Center-to-Left/Right (roll)
11: Corners-to-Center (implode)
12: Left-to-Right (blind)
13: Random (from the 12 transition modes above)