Design Specification Model No.: ZM108 Model name: ZM108 IEEE 802.15.4 RF4CE ZigBee transceiver module Version: v0.1 Date: July 15, 2010 Quanta Microsystems, Inc. 5F, No.
U.S. Regulatory Wireless Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, As long as 2 conditions above are met, further transmitter test will not be required.
Contents 1. 2. Revision History ............................................................................................................... 3 Overview ........................................................................................................................... 4 2.1. Scope...................................................................................................................... 4 2.2. Features .....................................................................................
1. Revision History Date Jul 15, 2010 Release Author 0.
2. Overview 2.1. Scope This document describes the specifications of ZM108 IEEE 802.15.4 transceivers module. The low power consumption and smaller size are suitable for consumer electronic. ZM108 also provides a cost-effective solution for short-range data links and networks. 2.2.
2.3. Specification Absolute Maximum Ratings Rating Symbol Value Unit Power Supply Voltage VBATT, VDDINT -O.3 to 3.9 Vdc RF Input Power Pmax 1O dBm Storage Temperature Range Tstg -2O to 7O °C Operating conduction Rating Symbol Min Power Supply Voltage VBATT, VDDINT 2.O Typ 3.0 Operation Temperature Rang TA -1O 25 Operation Frequency f Transmit Center Frequency Tolerance Max Unit 3.6 VDC 6O °C 2.4O5 2.48 GHz -4O +4O ppm Max Unit Characteristic (operating voltage=3.
2.4.
2.5.
2.6. RoHS Compliant ZM1O8 is fully compliant to RoHS requirement. 2.7. EMI EMC Certifications ZM1O8 is fully compliant with FCC, CE regulatory requirements.
