User Manual

Quanta Microsystems, Inc.
Subject:
ZM101 operation manual-RF mode
Rev: 0.2
Doc No.
OP_ZM10X-1
Revised Date:
2008/03/28 Page: 3 of 10
QMI PROPERTY & CONFIDENTIAL!
3
1. Adaptor board connection and setup
 Power IN (+2.7~+3.3Vdc)
 USB plug in:
― J_USB should be selected as USB PWR IN mode
― USB +5V Æ LDOÆPower in
 RCA Jack plug in:
― J_DC should be 2-3 pin short.
― Use a +4~7V(inner) DC adaptor plug in CON_RCAÆ LDOÆPower in
 Pin header plug in:
― Use other power source(such as power supply)
― Supply +2.7~+3.3V and plug in by J_3V pin headerÆPower in
Fig1.1 Adaptor board and DUT test setup