User's Manual

Alcatel-Lucent 9799 MUD 2.5 GHz – User Guide Alcatel-Lucent 5
E1P7 October 2008
2 Installation
Overview
Before you can use your new MIMO USB Dongle, your computer must have the proper
software drivers installed. Do not install your USB Dongle until prompted to do so during
the software installation procedure.
Before installing your USB Dongle, first install the software found in the Installation
CD.
Hardware and Software installation
Overview
The following section will guide you through the MIMO USB Dongle hardware and
software installation.
Only plug in your USB Dongle after being prompted to do so. If you have problems to
find this slot, have a look at your computer’s user manual or consult the manufacturer of
your computer. Plug in the USB Dongle carefully into the slot, making sure that the USB
Dongle is firmly seated in the slot. The MIMO USB Dongle software installs drivers on
your laptop that allows you to use the USB Dongle just like a regular modem.
The following example screens are for reference only. Software version and MAC
address are subject to change.
Related information
This document describes how to install your MIMO USB Dongle in a Windows XP or
Windows Vista operating system. Please note that the screen shots are taken using a
Windows Vista operating system and may differ slightly from a Windows XP
environment. However the functionality is the same.
Windows Vista users must install under Administrator mode for installation to be
complete.