User's Manual

第 4 頁，共 7 頁
3. Overview
3.1. Scope
This document describes the specifications of US302 WLAN USB
module. The low power consumption and smaller size are suitable for USB
adapter.
US302 implements half-duplex OFDM, CCK, and DSSS baseband
processing supporting all IEEE 802.11n data rates. The MAC supports the
IEEE 802.11 wireless MAC protocol as well as 802.11i security, receive
and transmit filtering, error recovery, and quality of service(QoS), and
Extended Range technology, dramatically increasing WLAN performance
3.2. Features
 BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK and CCK
modulation technique
 Operates at 2.4GHz frequency band
 802.11e compatible bursting
 Supports Windows XP, Windows Vista, Linux kernel 2.6.10.
 USB bus powered, external power is no required.
 Support Pre-IEEE 802.11n (TGn draft 6.0), short GI and long GI,
20MHz and 40 MHz bandwidth. Data rate up to 150Mbps maximum.
 Supports Ad-hoc mode in IEEE 802.11b, Ad-hoc G (802.11g OFDM
rates) and Ad-hoc N (802.11n rates) mode.
 802.11n SSN technique (1Transmit/1Receive).
 Supports Infrastructure mode in 802.11n,802.11b and 802.11g modes
 Supports Site survey: 802.11n/g/b BSS and IBSS.
 Supports USB adapter hot-swap, device driver disable/enable
 Supports Radio On/Off in software.
 Supports IEEE 802.1X,
i Authentication modes: Open system, Share Key, Auto Switch,
IEEE 802.1x, WPA, WPA-PSK, WPA2, WPA2-PSK
ii Encryption method: WEP 64/128, TKIP, AES
 USB 2.0(High/Full Speed) and backward compatible with USB 1.1
(Full Speed).