User's Manual

Section Three: Modem Installation

The following steps provide instructions for installing your 56K Internal modem.

1. Check the BT/modem Module already inserted into the slot.

2. Insert the connector of RJ-11 cable into the female connector of modem. The connector is

keyed and will no allow incorrect insertion. Plug the other end of the RJ-11 cable into an

available phone jack.

3.1 Driver Installation

Your modem is using the Plug and Play (PnP) capabilities of you computer. PnP is a set of

specifications that define the ability for the computer hardware and operating system to

automatically configure all compliant devices that are installed, relieving the user of the need

to determine which addresses and interrupts to user for each device.

Proceed to the following section.

1. Start Windows 98, an “PCI Card” dialog with drive selected will appear. Click “Next”

2. Search for the best driver for Modem card and click Next to continue.