User's Manual

Phone Menu 95
Codes
Change phonecode:
The phonecode is used for the SIM lock, which protects the phone
from being used with a SIM other than yours.
From Phone Menu
1.
4 Security A(Select)
2.
4 Codes A(Select)
3. 4 Change phonecode A(Select)
4. Enter a new phonecode
A(OK)
5. Enter the new code to verify
A(OK)
PIN Control:
The PIN protects your SIM against unauthorised use. If you
enable the PIN, every time the phone is switched on, you will be
prompted to enter the PIN.
From Phone Menu
1.
4 Security A(Select)
2. 4 Codes A(Select)
3.
4 PIN Control A(Change)
4. Enter the PIN number
A(OK)
5.
A(Change) Set to either enable or disable the PIN
6. @(OK)
NOTE: If the phonecode is entered incorrectly 10 times, the phone will
cease to operate permanently. If you change the phonecode from the
second time on, you must enter the previous phonecode first, then enter
the new phonecode twice.
NOTE: If the PIN code is entered incorrectly 3 times, the PIN will be
blocked. To unblock the PIN, you must enter your PUK code. If you enter
an incorrect PUK code 10 times, your SIM will be blocked permanently.
X300OIEnglish.bookPage95Monday,April19,20046:23PM