User's Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the workstation for use
- Working with the workstation
- Switching the workstation on
- Switching off the workstation
- Indicators
- Keyboard
- Display settings
- Battery
- Using the power-management features
- Hard disk
- Inserting and removing modules
- Optical drives
- Floppy Disk Drive
- 56k-Modem
- Connecting IEEE1394 (FireWire)
- PC cards
- SmartCards
- Microphone and loudspeakers
- Fingerprint reader
- Property and data protection
- Connecting external devices
- Settings in BIOS Setup
- Troubleshooting and tips
- Installing new software
- Saving and restoring system files
- Restoring the hard disk contents under Windows
- The workstation's date or time is incorrect
- Battery indicator does not illuminate
- The LCD screen of the workstation remains blank
- The workstation's LCD display is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable
- The workstation does not start after switch on
- The workstation stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Error messages on the screen
- Memory expansion
- Technical data
- Index
Working with the workstation Keyboard
26 A26391-K115-Z120-2-7619
Switching the keyboard on and off
Ê Switch the keyboard ON or OFF with the ON/OFF switch.
Switch off the keyborad whenever you do not intend to use it for a prolonged period of time or whilst
on board a flight.
Operating the keyboard without a radio connection
!
Since the removable keyboard is operated by a radio connection, your workstation may
only be switched on during a flight if you operate the workstation without a radio
connection in the way described.
Ê Connect the PS/2 lead cable supplied to the right-hand port on the keyboard and to the
CELSIUS Mobile Workstation.