User's Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the workstation for use
- Working with the workstation
- Switching the workstation on
- Switching off the workstation
- Indicators
- Keyboard
- Display settings
- Battery
- Using the power-management features
- Hard disk
- Inserting and removing modules
- Optical drives
- Floppy Disk Drive
- 56k-Modem
- Connecting IEEE1394 (FireWire)
- PC cards
- SmartCards
- Microphone and loudspeakers
- Fingerprint reader
- Property and data protection
- Connecting external devices
- Settings in BIOS Setup
- Troubleshooting and tips
- Installing new software
- Saving and restoring system files
- Restoring the hard disk contents under Windows
- The workstation's date or time is incorrect
- Battery indicator does not illuminate
- The LCD screen of the workstation remains blank
- The workstation's LCD display is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable
- The workstation does not start after switch on
- The workstation stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Error messages on the screen
- Memory expansion
- Technical data
- Index
Keyboard Working with the workstation
A26391-K115-Z120-2-7619 25
Operating the removable radio keyboard for use
The keyboard can be removed as described above.
The keyboard is permanently linked to the workstation by means of a wireless connection. The right-
hand indicator on the keyboard lights as soon as a wireless connection is established. No keyboard
input is possible until the indicator lights. Occasionally it can take up to 15 seconds to establish a
connection (normally 2 to 5 seconds).
The battery indicator is on when the battery is charging. The battery is charged only when the
keyboard is attached to the workstation. The battery indicator flashes if the battery is low and the
keyboard is removed. Re-attach the keyboard so that the battery can recharge.
i
Place the keyboard on the device as often as possible so that the battery can be charged.
1
If you cannot establish a wireless connection
between the keyboard and the workstation,
press the Reset button on the rear of the
keyboard (hole on the rear of the keyboard).