User's Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the workstation for use
- Working with the workstation
- Switching the workstation on
- Switching off the workstation
- Indicators
- Keyboard
- Display settings
- Battery
- Using the power-management features
- Hard disk
- Inserting and removing modules
- Optical drives
- Floppy Disk Drive
- 56k-Modem
- Connecting IEEE1394 (FireWire)
- PC cards
- SmartCards
- Microphone and loudspeakers
- Fingerprint reader
- Property and data protection
- Connecting external devices
- Settings in BIOS Setup
- Troubleshooting and tips
- Installing new software
- Saving and restoring system files
- Restoring the hard disk contents under Windows
- The workstation's date or time is incorrect
- Battery indicator does not illuminate
- The LCD screen of the workstation remains blank
- The workstation's LCD display is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable
- The workstation does not start after switch on
- The workstation stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Error messages on the screen
- Memory expansion
- Technical data
- Index
Working with the workstation Keyboard
22 A26391-K115-Z120-2-7619
Fn
+
F12
Decreasing screen brightness
This key combination decreases screen brightness.
Ctrl
+
C
Halting the current operation
This key combination can be used to halt an operation instantly without
clearing the keyboard buffer.
+
Backtab (Shift+Tab)
This key combination moves the cursor back to the previous
tabular stop.
Ctrl
Alt Del
Carrying out a warm boot
Warm boot
This key combination restarts the workstation. First hold down
the
[Ctrl] and [Alt] key, and then press the [Del] key. With
Windows 98, Windows 2000, Windows ME and Windows NT
Task Manager appears first. Then you must press all three
keys again to re-boot.