User's Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the workstation for use
- Working with the workstation
- Switching the workstation on
- Switching off the workstation
- Indicators
- Keyboard
- Display settings
- Battery
- Using the power-management features
- Hard disk
- Inserting and removing modules
- Optical drives
- Floppy Disk Drive
- 56k-Modem
- Connecting IEEE1394 (FireWire)
- PC cards
- SmartCards
- Microphone and loudspeakers
- Fingerprint reader
- Property and data protection
- Connecting external devices
- Settings in BIOS Setup
- Troubleshooting and tips
- Installing new software
- Saving and restoring system files
- Restoring the hard disk contents under Windows
- The workstation's date or time is incorrect
- Battery indicator does not illuminate
- The LCD screen of the workstation remains blank
- The workstation's LCD display is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable
- The workstation does not start after switch on
- The workstation stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Error messages on the screen
- Memory expansion
- Technical data
- Index
Keyboard Working with the workstation
A26391-K115-Z120-2-7619 21
Key combinations
The following description of key combinations refers to functions when using Microsoft Windows.
Some of the following key combinations may not function in other operating systems and with some
device drivers.
Other key combinations are described in the relevant manuals supplied with your application
programmes.
Key combinations are performed as follows:
Ê Press and hold the first key in the combination.
Ê While holding the first key down, press the other key or keys in the combination.
i
If the external keyboard does not feature an [Fn] key, you can simultaneously press
the [Ctrl] + [Alt Gr] keys or the [Ctrl] + [Alt] keys.
Fn
+
F3
Enlarge MS-DOS screen
This key combination enlarges the screen in the MS-DOS mode to the full-
screen mode or switches it back to the normal display mode.
F4
Fn
+
Switch internal touchpad on/off
This key combination enables and disables the touchpad function.
To do this, set the setting Internal Pointing Device to Auto Disabled in the BIOS
Setup in the menu Advanced - Keyboard/Mouse Features.
Fn
+
F5
Switch Speed Skp© mode on
This key combination switches between the possible speed Skp© modes:
- Maximum power
- Battery-optimised power (reduced process speed in battery mode)
F6
Fn
+
Switching the loudspeakers on/off
This key combination switches your notebook's integrated loudspeakers off and
on.
Fn
+
F7
Increasing the volume
This key combination raises the volume of the integrated loudspeakers.
F8
Fn
+
Reducing the volume
This key combination reduces the volume of the integrated loudspeakers.
F9
Fn
+
LCD off
This key combination switches off the LCD screen to save power.
Fn
+
F10
Switching between internal and external screen
If an external monitor is connected, the monitor on which the output is to be
displayed can be selected with this key combination. You can opt to use:
· just the workstation's LCD screen
· just the external monitor
· both the LCD screen and the external monitor.
Fn
+
F11
Increasing screen brightness
This key combination increases screen brightness.