User's Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the workstation for use
- Working with the workstation
- Switching the workstation on
- Switching off the workstation
- Indicators
- Keyboard
- Display settings
- Battery
- Using the power-management features
- Hard disk
- Inserting and removing modules
- Optical drives
- Floppy Disk Drive
- 56k-Modem
- Connecting IEEE1394 (FireWire)
- PC cards
- SmartCards
- Microphone and loudspeakers
- Fingerprint reader
- Property and data protection
- Connecting external devices
- Settings in BIOS Setup
- Troubleshooting and tips
- Installing new software
- Saving and restoring system files
- Restoring the hard disk contents under Windows
- The workstation's date or time is incorrect
- Battery indicator does not illuminate
- The LCD screen of the workstation remains blank
- The workstation's LCD display is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable
- The workstation does not start after switch on
- The workstation stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Error messages on the screen
- Memory expansion
- Technical data
- Index
Working with the workstation Keyboard
20 A26391-K115-Z120-2-7619
Fn
Fn key
The
[Fn] key enables the special functions indicated on overlay keys (see "Key
combinations").
If the external keyboard does not feature an [Fn] key, you can simultaneously press
the [Ctrl] + [Alt Gr] keys or the [Ctrl] + [Alt] keys.
Cursor keys
The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or
right.
Pause
Break
Pause key
The
[Pause] key temporarily suspends display output. Output will resume when you
press any other key.
Start key
The Start key invokes the Windows Start menu.
Menu key
The Menu key invokes the menu for the marked item.
Numeric keypad
7 890
UI OP
J
M
K
;
L
:_
Ö
/
{
(
[
)
]
=
}
µ, . -
1
789 *
456-
123+
0/
.
2
1 = Characters enabled when NumLK indicator is not lit (see "Indicators").
2 = Characters enabled when NumLK indicator is lit (see "Indicators").
If the numeric keypad is enabled (NumLK indicator is lit) and you hold down the
[Fn] key, you can
output the characters printed in blue on the bottom right of the keys.