User's Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the workstation for use
- Working with the workstation
- Switching the workstation on
- Switching off the workstation
- Indicators
- Keyboard
- Display settings
- Battery
- Using the power-management features
- Hard disk
- Inserting and removing modules
- Optical drives
- Floppy Disk Drive
- 56k-Modem
- Connecting IEEE1394 (FireWire)
- PC cards
- SmartCards
- Microphone and loudspeakers
- Fingerprint reader
- Property and data protection
- Connecting external devices
- Settings in BIOS Setup
- Troubleshooting and tips
- Installing new software
- Saving and restoring system files
- Restoring the hard disk contents under Windows
- The workstation's date or time is incorrect
- Battery indicator does not illuminate
- The LCD screen of the workstation remains blank
- The workstation's LCD display is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable
- The workstation does not start after switch on
- The workstation stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Error messages on the screen
- Memory expansion
- Technical data
- Index
Working with the workstation Indicators
18 A26391-K115-Z120-2-7619
2
Indicator PC card 2
The indicator lights up when a PC card disk in slot 2 is being accessed.
You must not remove the PC card from the slot when this indicator is lit.
Hard disk indicator
The indicator lights up when the hard disk drive is being accessed.
Floppy disk drive indicator
The indicator lights up when a floppy disk in the floppy disk drive is being accessed.
You must not remove the floppy disk from the floppy disk drive when this indicator is
shown.
Optical drive indicator
The indicator is lit when the CD/DVD in the optical drive is being accessed.
You must not remove the CD/DVD from the drive when this indicator is lit.
CapsLK
CapsLK indicator (Caps Lock)
The
Ï key has been pressed. All the characters you type appear in uppercase. In the
case of overlay keys, the character printed on the upper left of the key appears when that
key is pressed.
ScrLK
Scroll indicator (Scroll Lock)
The
[Scr] key has been pressed. The effect this key has varies from programme to
programme.
NumLK
NumLK indicator (Num Lock)
The key combination
[Fn] + [Num LK] has been pressed. The numbers on the lower left
on keys in the integrated numeric keypad are enabled.