User's Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the workstation for use
- Working with the workstation
- Switching the workstation on
- Switching off the workstation
- Indicators
- Keyboard
- Display settings
- Battery
- Using the power-management features
- Hard disk
- Inserting and removing modules
- Optical drives
- Floppy Disk Drive
- 56k-Modem
- Connecting IEEE1394 (FireWire)
- PC cards
- SmartCards
- Microphone and loudspeakers
- Fingerprint reader
- Property and data protection
- Connecting external devices
- Settings in BIOS Setup
- Troubleshooting and tips
- Installing new software
- Saving and restoring system files
- Restoring the hard disk contents under Windows
- The workstation's date or time is incorrect
- Battery indicator does not illuminate
- The LCD screen of the workstation remains blank
- The workstation's LCD display is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable
- The workstation does not start after switch on
- The workstation stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Error messages on the screen
- Memory expansion
- Technical data
- Index
Indicators Working with the workstation
A26391-K115-Z120-2-7619 17
Indicators
The following icons appear in the display field of your workstation:
A1
The meanings of the symbols are as follows:
Power-on indicator
· The indicator lights up:The workstation is on.
· The indicator flashes (1 second on / 1 second off):
The workstation is in energy-saving mode.
· The indicator is dark:
The workstation is switched off.
Power indicator
The power adapter is supplying power to the workstation.
07%
Battery indicator
The battery charge state is indicated in the status indicator panel.
1
Indicator PC card 1
The indicator lights up when a PC card disk in slot 1 is being accessed.
You must not remove the PC card from the slot when this indicator is lit.