User's Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the workstation for use
- Working with the workstation
- Switching the workstation on
- Switching off the workstation
- Indicators
- Keyboard
- Display settings
- Battery
- Using the power-management features
- Hard disk
- Inserting and removing modules
- Optical drives
- Floppy Disk Drive
- 56k-Modem
- Connecting IEEE1394 (FireWire)
- PC cards
- SmartCards
- Microphone and loudspeakers
- Fingerprint reader
- Property and data protection
- Connecting external devices
- Settings in BIOS Setup
- Troubleshooting and tips
- Installing new software
- Saving and restoring system files
- Restoring the hard disk contents under Windows
- The workstation's date or time is incorrect
- Battery indicator does not illuminate
- The LCD screen of the workstation remains blank
- The workstation's LCD display is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable
- The workstation does not start after switch on
- The workstation stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Error messages on the screen
- Memory expansion
- Technical data
- Index
A26391-K115-Z120-2-7619 9
Before you travel
!
As the removable keyboard is operated by a radio connection ,your workstation may not
be switched on during a flight.
Switch off the keyboard also (see chapter " Switching the keyboard on and off").
· Copy important data from the hard disk onto a floppy disk.
· If you are travelling abroad, ensure that the power adapter can be operated with the local
mains voltage. If this is not the case, obtain the appropriate power adapter for your workstation.
Do not use any other voltage converter!
i
If you travel in another country, check whether the local power supply and the
specifications of the power cable are compatible. If this is not the case, buy a power cable
that matches the local conditions. Do not use a connection adapter for electrical devices
to connect the workstation.
If you use a modem, incompatibilities with the local telecommunications system may
result.
Transporting the workstation
· Remove all data carriers (e.g. floppy disk, CD) from the drives.
· Switch off the workstation.
· Unplug the power adapter and all peripheral devices from the mains outlet.
· Disconnect the power adapter cable and the data cables of all peripheral devices.
· Close the LCD display of the workstation so that it locks into place.
· If the notebook needs to be shipped, use the original packaging or other suitable packaging to
protect it from damage caused by mishandling.
· To protect against damaging jolts and bumps, use a carrying case to transport your
workstation.
· Protect the workstation from severe shocks and extreme temperatures (e.g., direct sunlight in a
car).
Important notes Transporting the workstation