User's Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the workstation for use
- Working with the workstation
- Switching the workstation on
- Switching off the workstation
- Indicators
- Keyboard
- Display settings
- Battery
- Using the power-management features
- Hard disk
- Inserting and removing modules
- Optical drives
- Floppy Disk Drive
- 56k-Modem
- Connecting IEEE1394 (FireWire)
- PC cards
- SmartCards
- Microphone and loudspeakers
- Fingerprint reader
- Property and data protection
- Connecting external devices
- Settings in BIOS Setup
- Troubleshooting and tips
- Installing new software
- Saving and restoring system files
- Restoring the hard disk contents under Windows
- The workstation's date or time is incorrect
- Battery indicator does not illuminate
- The LCD screen of the workstation remains blank
- The workstation's LCD display is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable
- The workstation does not start after switch on
- The workstation stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Error messages on the screen
- Memory expansion
- Technical data
- Index
Important notes Safety
4 A26391-K115-Z120-2-7619
Cd Cadmium
Hg Mercury
Pb Lead
· During installation and before operating the device, please observe the instructions on
environmental conditions in the chapter entitled "Technical data" as well as the instructions in
the chapter "Preparing the workstation for use".
· When cleaning the device, please observe the relevant notes in the paragraph "Cleaning the
workstation".
· If the workstation is brought into the installation site from a cold environment, condensation can
form. Before operating the workstation, wait until it is absolutely dry and has reached
approximately the same temperature as the installation site.
· Switch off the workstation and / or the radio keyboard in hospitals or near to an electronic
medical system. Do not take the workstation into an operating theatre with the radio keyboard
switched on as the radio waves emitted from the keyboard can adversely affect the functioning
of electronic medical systems.
· Keep the workstation at a distance of at least 20 cm away from a pacemaker as its proper
functioning can be adversely affected by radio waves otherwise.
· Switch off the workstation and / or the radio keyboard whilst driving or whilst on board a flight.
· Do not use the radio keyboard near to flammable gases as they can cause an explosion or a
fire.
The company Fujitsu Siemens Computers GmbH cannot be held responsible for radio or television
faults arisng from unauthorised changes made to this device. Fujitsu Siemens is, furthermore, not
responsible for replacing and / or exchanging connector cables and devices which have not been
specified by Fujitsu Siemens Computers GmbH. The user is solely responsible for repairing faults
arising from such unauthorised changes made to a device and for replacing and / or exchanging
devices.