User Manual Part 2

錯誤 ! 尚未定義樣式。 錯誤 ! 尚未定義樣式。
Property and data protection
Your notebook enables you to protect your system and personal data in a number of ways against
unauthorised access. By combining these options, you can achieve maximum protection for your
system.
Security panel
a
a = Security panel
The security panel enables you to protect your notebook from unauthorised use with a hardware
password. When a Security Panel password is activated, the notebook will not start without the correct
insertion of a password. The password is entered before the BIOS is read out and the hardware
activated.
The password is requested from all suspend and resume modes. As a result, a security level is also
provided with the energy-saving mode activated.
The Security Lock function can be used when the notebook is started from the Resume mode, when
switched off and from the Save-to-Disk mode.
Password protection of Save-to-RAM Mode is also supported. This function can be deactivated in the
BIOS Setup. In the Security Panel on Resume menu the default value is set to Enable at the factory.
It is possible to assign a supervisor password and a user password.
i
If you have forgotten your user password, you can use the supervisor password to reset the
user password, and you can then enter a new user password.
If the security panel is active and you have forgotten both passwords, please contact your
our Hotline/Help Desk.
The supervisor password must be set so that the notebook can be unlocked again, and so that a new
user password can be assigned when the existing one has been forgotten.