User Manual Part 2

錯誤

尚未定義樣式。

Start the Setup programme on the CD.

You must then reinstall all the drivers. Use the "Drivers & Utilities" CD.

The notebook's date or time is incorrect

Double-click on the clock in the task bar and adjust the time.

Set the time and/or date in the BIOS Setup menu Main.

If the date and time are repeatedly incorrect when you switch on the notebook, the buffer

battery that supplies the internal clock is dead.

Connect the notebook via its power adapter to a grounded mains outlet or install a fresh

battery. The buffer battery will take approximately two days to complete its recharge. Should

the problem persist, please contact our Hotline/Help Desk.

Battery indicator does not illuminate

Battery is not installed or is defective

If the battery status indicator does not light up, either no battery is installed or there is no contact

between the notebook and the battery.

Check whether the battery is installed correctly in its compartment.

It may be necessary to replace the battery with a new one. When you dispose of used batteries, please

observe the safety instructions in the chapter "

錯誤

找不到參照來源。

The LCD screen of the notebook remains blank

Monitor is switched off

Press a key or enter the password

External monitor or television set connected

Set the setting Display Settings to LCD BIOS-Setup in the menu Advanced - Video Features.

The notebook's LCD screen is difficult to read

Reflection

Turn the notebook or alter the tilt of the LCD screen.