User Manual Part 2

錯誤

尚未定義樣式。

錯誤

尚未定義樣式。

Connections for external devices on the Port Replicator II-L

The ports for external devices are on the rear of the port replicator II-L. The standard ports are

indicated by symbols.

The LAN connection on the Port Replicator II-L only functions when your notebook is

equipped with an internal LAN or modem/LAN module. Otherwise this connection is

inoperative.

The serial, parallel and audio ports can be configured in the BIOS Setup of the notebook.

Some of the devices that you connect require special drivers (e.g. a printer driver for the

printer). For information on which driver you need to install and where, please refer to the

documentation for the device concerned.

The following illustration shows the positions of the connections on the II-L port replicator.

1 = Keyboard port

2 = PS/2 mouse port

3 = DC jack (DC IN)

4 = Serial port

5 = Parallel port

6 = Two USB ports

7 = Monitor port

8 = LAN connector

9 = ON/OFF switch (Standby button)

10 = Reset button

11 = Connection for floppy disk drive*)

12 = Audio input (Line in)

13 = Microphone connector

14 = Headphones port

*) has no function on this

LIFEBOOK

C-Serie