User Manual Part 2

錯誤 ! 尚未定義樣式。 錯誤 ! 尚未定義樣式。
No passwords are assigned when the notebook is delivered. The passwords can be assigned with the
FJSECS.EXE (supervisor password) and FJSECU.EXE (user password) programmes. The supervisor
password and the user password can be assigned with up to 4 key entries. Multiple keys (1+2) can be
used together as one key entry.
i
The supervisor password has to be set before the user password can be assigned.
Assigning a supervisor password
The setup programme can be found under Start - AddOn Software.
Ê
Enter the programme name FJSECS.EXE under Start - Run.
Ê
Click on OK.
Ê
Follow the instructions of the programme.
Assigning a user password
The setup programme can be found under Start - AddOn Software.
Ê
Enter the programme name FJSECU.EXE under Start - Run.
Ê
Click on OK.
Ê
Follow the instructions of the programme.
Examples of possible password combinations
"1" + Enter
"1" + "2" + Enter
"1" + "2" + "3" + Enter
"1" + "2" + "3" + "4" + Enter
("1"+"2") + ("1" + "2" + "3" ) + ("1" + "2" + "3" + "4" ) + "1" + "2" + Enter
i
("1" + "2") means that the key "1" and "2" must be pressed simultaneously.
"Enter" refers to the Enter key of the Security Panel under the LCD screen.
Password error alarm
If a password is entered incorrectly three times, a one-minute alarm is triggered. If the correct
password is entered during the alarm, the notebook starts up normally.
After one minute the notebook stops the alarm. The user must press the Suspend/Resume key to start
or enter the Resume mode.
After pressing the Suspend/Resume button, the notebook is locked again; the user must now enter the
correct user password again. If the entry is correct, the notebook will start.