User Manual Part 1

錯誤

尚未定義樣式。

Enter CD\UTILITY\PHDISK at the DOS prompt and press the Enter key.

Enter PHDISK after the DOS prompt.

Follow the instructions on the screen.

Be sure to define a sufficiently large partition.

If you require additional information on the programme parameters, enter PHDISK or PHDISK /INFO

at the DOS prompt.

We recommend that you use the considerably more flexible option FILE when running

PHDISK. We discourage the use of the PARTITION option, as the safety of the data already

saved on the hard disk is not ensured.

Additional power-management features

Closed cover switch

When you close the LCD display panel, the notebook switches into Standby mode. Opening the LCD

display panel ends Standby mode.

Set the value On in the BIOS Setup in the Power - Advanced Features menu for the Lid Closure

Suspend parameter if your notebook is to go into the energy-saving mode when the lid is folded

down.

If the energy-saving mode is to be ended again by folding up the LCD screen, then also set the

LidOpen Resume parameter to On.

Power Button

You can configure the Suspend/Resume button.

If you want to use the Suspend/Resume button as an ON/OFF switch, set the Power Button parameter

to Power Off in the Power - Advanced Features menu in the BIOS Setup.

Standby Timeout

With this mode you switch off the LCD screen and internal components after a defined period of time.

Any activity automatically returns the notebook to normal operation.

Hard Disk timeout

With this mode the motor of the hard disk drive is switched off as soon as no activity with the keyboard

or the pointing device, or any other input or output activity takes place for a time period defined in the

BIOS Setup.

This parameter is set in the Power menu in the BIOS Setup. When the hard disk is accessed, the motor

of the hard disk drive is automatically switched on again.