AMD TED 14” Notebook User Menual
Device layout figure KB Finger Print Click Pad SPEAKER
Device layout figure - Continued CAMERA LED CAMERA Mic Mic BATT Charge LED Audio combo jack LCD & Touch screen Power Button VOLUME BUTTON USB TYPC C
Buttons & LEDs Buttons/ LED Power button Button Function • Press and hold to turn the device on or off. • Press and hold for 4 seconds to reset the device if it has fatal errors or hang-ups, hang or freezes. Volume button • Press to adjust the device volume.
Devices and Socket Name Function LCD + Touch panel 14.0” FHD LCD with touch panel supported Wifi + BT4.0 802.11a/b/g/n/ac +BT4.1 combo module Camera Built-in 1M HD Camera, digital microphone included Touchpad Precision touchpad FingerPrint Security input Speaker Internal speaker USB type C connector 1. Connect to USB2/3 devices, display devices 2. Other devices via a USB type C dongle 3.
Using mode 3 using mode supported: Clamshell mode, Tent mode and Tablet mode Clamshell mode Tent mode: KB & touchpad disabled Tablet mode: KB & touchpad disabled
Charging the battery • Use the adapter to charge the battery via USB type C connector before using it for the first time. • Please use only device-provided provided chargers to charge battery. Unapproved chargers or cables can cause the battery to explode or damage the device.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Continued FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed) Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR.
Industry Canada statement This device complies with Industry Canada license-exempt license RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Industry Canada statement - Continued This device and its antenna(s) must not be co-located located or operating in conjunction with any other antenna or transmitter, except tested built-in in radios. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. The County Code Selection feature is disabled for products marketed in the US/ Canada.
Industry Canada statement - Continued Caution : 1) the device for operation in the band 5150-5250 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel channel mobile satellite systems; 2) the maximum antenna gain permitted for devices in the bands 5250-5350 5250 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and 3) the maximum antenna gain permitted for devices in the band 5725-5825 5725 MHz shall comply with the e.i.r.p.
System specification System specification Voltage/ Current: Voltage 20V, Maximum current 2A AC Adapter Input voltage range / Frequency： ：100 ~ 240 V AC, 50/60 Hz DC Output：20V/0 ~ 2.25A Trade name / Model : DELTA ELECTRONICS, INC. / ADP-45PE BB Battery Built-in Lithium-ion Polymer rechargeable battery Capacity: 52.
