User's Manual
Table Of Contents
- Contents
- Getting Help
- Checking Out Your Gateway Convertible Tablet PC
- Getting Started
- Installing the battery
- Connecting the ACadapter
- Connecting the dial-up modem
- Connecting to a cable or DSL modem or to an Ethernet network
- Starting your convertible tablet PC
- Turning off your convertible tablet PC
- Restarting (rebooting) your convertible tablet PC
- Status indicators
- Using the keyboard
- Tablet Control Buttons
- Using the EZPad touchpad
- Using the display
- Using the pen
- Adjusting the volume
- Turning your wireless radio on or off
- Using Windows XP TabletPC2005
- Using Drives and Ports
- Managing Power
- Upgrading Your Convertible Tablet PC
- Using the Optional Port Replicator
- Maintaining Your Convertible Tablet PC
- Troubleshooting
- Safety, Regulatory, and Legal Information
- Index
143
www.gateway.com
Troubleshooting
■ Make sure that the battery is installed correctly. For more
information, see “Installing the battery” on page 22.
■ Make sure that the battery is fully recharged. For more information,
see “Recharging the battery” on page 77.
■ Make sure that the battery is calibrated correctly. For more
information, see “Recalibrating the battery” on page 77.
■ Let the battery return to room temperature.
Printer
The printer will not turn on
■ Make sure that the printer is online. Many printers have an
online/offline button that you may need to press.
■ Make sure that the power cable is plugged into an AC power source.
The printer is on but will not print
■ Check the cable between the printer and your convertible tablet PC.
Make sure that it is connected to the correct port.
■ Make sure that the printer is online. Many printers have an
online/offline button that you may need to press so the printer can
start printing. Press the button to put the printer online.
■ Check the port and cable for bent or broken pins.
■ If the printer you want to print to is not the default printer, make
sure that you have selected it in the printer setup.
To set a default printer:
1 Tap or click Start, then tap or click Control Panel. The Control
Panel window opens. If your Control Panel is in Category View,
tap or click
Printers and Other Hardware.
2 Tap/Double-tap or click/double-click the Printers and Faxes icon.
The Printers and Faxes window opens.
3 Button-tap or right-click the name of the printer you want to
be the default printer, then tap or click
Set as Default Printer.