User's Manual
Table Of Contents
- Contents
- Getting Help
- Checking Out Your Gateway Convertible Tablet PC
- Getting Started
- Installing the battery
- Connecting the ACadapter
- Connecting the dial-up modem
- Connecting to a cable or DSL modem or to an Ethernet network
- Starting your convertible tablet PC
- Turning off your convertible tablet PC
- Restarting (rebooting) your convertible tablet PC
- Status indicators
- Using the keyboard
- Tablet Control Buttons
- Using the EZPad touchpad
- Using the display
- Using the pen
- Adjusting the volume
- Turning your wireless radio on or off
- Using Windows XP TabletPC2005
- Using Drives and Ports
- Managing Power
- Upgrading Your Convertible Tablet PC
- Using the Optional Port Replicator
- Maintaining Your Convertible Tablet PC
- Troubleshooting
- Safety, Regulatory, and Legal Information
- Index
102
www.gateway.com
Chapter 7: Upgrading Your Convertible Tablet PC
12 Remove the two screws that secure the hard drive to the hard drive
kit bracket.
13 Remove the bracket from the old drive.
14 Insert the new drive into the bracket, label side up, so the screw holes
line up.
15 Replace the two screws that secure the bracket to the drive.
16 Place the new hard drive kit into the bay and slide it into the
connector.
17 Replace the screws that secure the hard drive kit to your convertible
tablet PC.
18 Insert the battery, then turn your convertible tablet PC over.
19 Reconnect the optional port replicator.
20 Connect the power adapter, modem cable, and network cable, then
turn on your convertible tablet PC.
21 For instructions on installing Windows, your drivers, and your
applications, see the instructions in the restore booklet that came
with your convertible tablet PC.
Screw
Screw