User's Manual

1. Setting up the Phone
This section describes basic operations such as inserting your SIM card, charging the battery, and entering your PIN.
The following must be completed before you begin using the phone:
• Ensure that the battery is inserted
• Ensure that the SIM card is inserted
• Charge the phone's battery
1.1 Battery
The battery included with your phone is not charged. Before you can switch on your phone for the first time, you need
to install the phone's battery and charge it.
1.1.1 Inserting or Changing the Battery
To insert or change the battery:
圖A
Step 1: Slide down the battery down to remove it.
圖B
Step 2: Insert your battery with the metallic part in contact
with phone’s and gently press it down.
圖C
Steps 3: Install the battery door.
1.2.2 Charging the Battery
To charge a battery:
Step 1: Locate your charger connector on the left of your
phone. 圖D：請參考左圖，將Vi1手機圖牽線
Step 2: Connect the charger to the phone. Plug the
charger into a power socket. The charger connection
screen will be displayed. 圖E：請參考左圖，將Vi1手機圖
牽線
Disconnecting the charger
To disconnect the charger, grip it tightly and pull. You should disconnect the charger from the power outlet before
disconnecting the charger from the phone.
1.2.3 Charging Indicator
The first time you charge your battery, you should leave it charging for 8 hours. The battery only achieves optimum
performance after two or three complete charges.
When the battery power is low, the phone starts beeping and "Battery Low" will be displayed. When in use and during
charging, the indicator shows the following icons:
Icon Description Icon Description
Battery empty Battery nearly full