User's Manual

2. Enter the rater Per unit and Per minute.
To set Maximum cost (Steps 1-2):
1. Press
> Calls > Call settings > Call Services > Cost settings > Maximum cost.
2. Press Edit to turn Display credit On/Off and specify the Maximum cost by using keypad keys.
To set Auto display (Steps 1-2):
1. Press
> Calls > Call settings > Call Services > Cost settings > Auto display.
2. Set the Auto display to be Off or show Cost/Duration/Both.
Call divert
You may select call diversion when you are unable to pick up a phone call in the following conditions:
Divert for all calls (diverts all incoming calls to the number you assigned).
If not answered (divert an incoming call when it is not answered)
If out of reach (diverts all incoming calls to the number you assigned when the phone is turned off or out of signal
range).
When no reply (diverts an incoming call when it is not answered for a
period of time determined by your network).
If busy (diverts the incoming call when the line is busy).
Divert all data calls active (diverts the incoming call when the phone is receiving data).
To set Call divert (Steps 1-2):
1. Press
> Calls > Call settings > Call divert.
2. Select Call divert condition: All voice calls, If not answered, If out of reach, When no reply, If busy, Divert
all data calls active, or Cancel all.
To check Call divert status, press
> Calls
> Call settings > Call divert > Check status.
Call barring
This feature allows you to bar different types of calls made or received on your phone. Ask your service provider for a
4-digit password if you want to activate the feature. There are four types of calls that can be barred
z All outgoing (except emergency calls)
z All international (only calls within the home country can be dialled)
z Only here & home (international calls to your home network are allowed, but all other international calls are
barred.)
z All incoming (bars all incoming calls)
z Incoming if abroad (bars incoming calls when you are out of your home network range)
To set Call barring (Steps 1-2):
1. Press
> Calls > Call settings > Call barring.