User's Manual

To set Call divert (Steps 1-2):
1. Press
◎ > Settings > Connectivity > Call options > Call divert.
2. Select Call divert condition: All voice calls, If not answered, If out of reach, When no reply, If busy, Divert
all data calls active, or Cancel all.
To check Call divert status, press
◎ > Settings > Connectivity > Call options > Call divert > Check status.
Call barring
This feature allows you to bar different types of calls made or received on your phone. Ask your service provider for a
4-digit password if you want to activate the feature. There are five types of calls that can be barred
1. All outgoing (except emergency calls)
2. All international (only calls within the home country can be dialled)
3. Only here & home (international calls to your home network are allowed, but all other international calls are
barred.)
4. All incoming (bars all incoming calls)
5. Incoming if abroad (bars incoming calls when you are out of your home network range)
To set Call barring (Steps1-2):
1. Press
◎ > Settings > Connectivity > Call options > Call barring.
2. Select a barred call type: All outgoing, All international, Only here & home, All incoming, Incoming if
abroad, and Cancel all..
To check Call barring status, press
◎ > Settings > Connectivity > Call options > Call barring > Check status.
Fixed dialling
Fixed dialing allows you to only dial certain predefined numbers.
To turn on Fixed dialling (Steps 1-3):
1. Press
◎ > Settings > Connectivity > Call options > Fixed dialling.
2. Enter PIN2 code. An activating/deactivating message will be displayed on the screen.
3. Press
OK.
Closed user group
Closed user group is a network service that specifies the group of people whom you can call and who can call you. For
more information, contact your network operator or service provider.
To turn Closed user group On/Off, press
◎ > Settings > Connectivity > Call options > Closed user group >
Closed user group.
To select group, press ◎ > Settings > Connectivity > Call options > Closed user group > Select group.
To turn Outgoing access On/Off, press
◎ > Settings > Connectivity > Call options > Closed user group >
Outgoing access.
To turn Preferred group On/Off, press
◎ > Settings > Connectivity > Call options > Closed user group > Select
group.