User's Manual

1. Press >◎ Settings > General > Time & date > Time format.
2. Press Change to switch between 12 hours and 24 hours.
To set Date format (Steps 1-2):
1. Press ◎ Settings > General >Time & date > Date format.
2. Press Select or to choose a format (◎ DD/MM/YYYY, MM/DD/YYYY, YYYY/MM/DD, YYYY.MM.DD,
DD.MM.YYYY, YYYY-MM-DD, DD-MM-YYYY).
To set Power-on/Power-off time (Steps 1-4):
1. Press > ◎ Settings > General >Time & date > Power-on time or Power-off time.
2. Press Change and ＜/＞ key to turn the feature on/off.
3. When the Power-on time/Power-off .time feature is turned on, you need to specify an exact time by using
keypad keys.
4. Press Save.
Security
Security menu provides settings that prevent unauthorised use of your phone. Before you can change any security
settings, you will be asked to enter the following codes:
z SIM lock (a SIM protection feature)
z PIN code (a protection code if your SIM is stolen. It is provided by your network)
z PIN2 code (a protection code for charging information and FDN service)
z PUK/PUK 2 code (unblocking codes in case you forget your PIN/PIN2 codes)
z Phone lock (provided by the phone)
SIM Lock
This feature allows you to enable SIM lock feature, preventing your SIM card from the unauthorised use. Please
contact your service provider for SIM lock code.
To set your SIM lock (Steps 1-3):
1. Press
◎ > Settings > General > Security > SIM lock.
2. Press Select to turn SIM lock on/off.
3. To turn on SIM lock, the phone asks you to Enter PIN code.
Note: If you enter the wrong PIN code for three times, the SIM card will be locked.
Changing PIN/PIN2
You will be requested to enter your PIN when the phone is switched on. However, this feature can be turned off, which
leaves your phone at the risk of unauthorised use if it is stolen or lost. You can only change PIN codes, when they are
active.
To activate PIN (Steps 1-3):