User's Manual

ENG-11
DETAIL SETTINGS (SMART CONNECTION)
Item Description Remarks
PIN TYPE
- ONE-TIME
The PIN CODE is automatically created every time
stopping to access to the network.
- STATIC
Set up random number for the PIN CODE.
- The default factory setting Is [ONE-
TIME].
SECURITY TYPE Select this when [ONE-TIME] is set for PIN TYPE.
- SIMPLE
Consists of 8 digits number which is two times
repetition of the PIN CODE.
- RANDOM
Automatically create eight digits security key.
SECURITY KEY Set this when [STATIC] is selected for PIN TYPE. - Consists of 8 to 63 alphanumeric char-
acters.
PIN CODE Set this when [STATIC] is selected for PIN TYPE.
- Four numbers
CHANNEL Select a wireless channel. - The default factory setting is “6”.
DETAIL SETTINGS (INFRASTRUCTURE)
Item Description Remarks
SITE SURVEY
• Runthesitesurveyanddisplaythedetectedac-
cess points.
• Themaximumof64accesspointscanbedis-
played.
• OnlyoneaccesspointwiththesamenameasSSID
is displayed.
• Theapplicableaccesspointsarethesecuritydis-
abled WPA-PSK, WPA2- PSK.
• A“Key”markisattachedwhenthesecuritysetting
of the access point has been enabled.
Note: If any access point is not detected,
select [SITE SURVEY] again after selecting
[RECONNECT] on the WIRELESS LAN SET-
TING screen.
SECURITY SETTING Select security type.
- [DISABLE]
Disable the security setting.
- WPA2-PSK
Input column for the security key is displayed.
- WPA/WPA2-PSK
Input column for the security key is displayed.
- The default factory setting is [DISABLE].
- The security key consists of 8 to 63
alphanumeric characters.
SSID Set the SSID
- The default factory setting is “NECDS”.
- SSID consists of 1 to 32 alphanumeric
characters.