User's Manual

72
Brightness
With the standby screen displayed, press Left Softkey, 8 and 2 and press Left Softkey to display the Option menu.
• Highlight this function and adjust the brightness for the photo shoot.
Special effects
With the standby screen displayed, press Left Softkey, 8 and 2 and press Left Softkey to display the Option menu, press 6
for
Special Effects
and use Up and Down keys to highlight and select the different color tint to take your photo: Normal,
Mono
,
Sepia
,
Bluish
.
• Change the color tint setting by pressing Left Softkey.
Zoom
With the standby screen displayed, press Left Softkey, 8 and 2 and press Left Softkey to display the Option menu, press 7
for the
Zoom
function.
Flicker Control
When taking pictures under a fluorescent light, flickers may occur. To prevent flickers, press Left Softkey, 8 and 2 from the standby
screen and press Left Softkey and press Left Softkey to display the Option menu, press 8 for the
Flicker control
function.
• Use Up and Down keys to highlight and select either
50Hz
or
60Hz
and press Left Softkey to confirm your selection.
Self Timer
With the standby screen displayed, press Left Softkey, 8 and 2 and press Left Softkey to display the Option menu, press 9.
Press Left Softkey to start the count down. The picture is taken after 10 seconds.
My Photos
With the standby screen displayed, press Left Softkey, 8 and 2 and press Left Softkey to display the Option menu, press 9
for the
Photos
function.
You can perform addition, subtraction, multiplication and division with the calculator function. The calculator can display a result
of up to 10 digits, with a maximum of 8 decimal places.
If a calculation results in a number exceeding the maximum, “Over Range“ appears in the calculation field.
Calculator Key
For the calculator function, the following keys are assigned with the different functions:
• Up key: Addition (+)
• Left key: Subtraction (-)
Calculator
The calculator can display a
result of up to 10 digits with a
maximum of 8 decimal places. If
a calculation results in a number
greater than the above
maximum, Over Range will be
displayed.
NEC.book Page 72 Monday, May 10, 2004 2:46 PM