User's Manual

40
• A confirmation screen is displayed momentarily and then the
Change PINs
display menu will be displayed.
SIM Lock
• The
SIM Lock
menu allows you to lock your SIM card from unauthorized usage. If
SIM PIN Lock
is enabled, SIM data
can be accessed only when the correct PIN code is entered. To enable/disable
SIM PIN Lock
, proceed as follows:
• With the standby screen displayed, press Left Softkey, 1 and 6 to display the
Security
menu screen.
• Press 3 or highlight
SIM Lock
and press Left Softkey to toggle SIM Lock On/Off. A tick in the Check Box beside the
option indicates that
SIM Lock
has been activated. You will have to key in the
Phone code
to activate
SIM Lock
.
Call Bar
This feature allows you to restrict the following type of calls made or received on your phone.
You will need a 4-digit password that your mobile service provider will provide you with to activate call barring. You may have
to register separately for each type of call barring.
• All outgoing (All outgoing calls, except emergency numbers 112 and 999 will be barred)
• Outgo internat (International outgoing - Only calls within the home country can be made on the phone)
• Out.int.xhome (International outgoing without home country - International calls not permitted. However calls can still be
made to your home country when you're abroad)
• All Incoming (All incoming calls will be barred; the forwarding of the calls to the mailbox will be offered a similar effect too)
• When roaming (You will not be able to receive calls when you are outside your home network. This means that no charges
will be incurred for incoming calls)
To place restrictions on certain type of calls:
With the standby screen displayed, press Left Softkey, 1, 6 and 4 to display the
Call Bar
menu displaying the different types
of call barring listed above.
Use the Up and Down keys to highlight the type of calls you want to restrict and press Left Softkey to display the option
menu. Highlight
Set
and press Left Softkey to activate call barring. You will be prompted to enter the Bar password.
Highlight
Check status
and press Left Softkey for the network to transmit and display the call barring status of the selected
type of calls.
Highlight
Clear
and press Left Softkey to disable call barring for the selected type of calls. You will be prompted to enter the
Bar password.
Status check
Check the status of calls barring for all the different types of calls. There is a delay while the phone checks call barrings status
with your network and reflects all the status.
NEC.book Page 40 Monday, May 10, 2004 2:46 PM