User's Manual

39
Auto Redial
The auto redial option allows your phone to re-dial an unsuccessful call up to 10 times. To set the auto redial on or off, use the
following procedure.
• With the standby screen displayed, press Left Softkey, 1 and 5 to display the
Call Service
menu screen.
• Press 3 or highlight
Auto Redial
and press the Left Softkey to toggle the automatic redial On or Off. A tick in the check
box beside the option indicates the activation of Auto Redial.
The Security Settings protects your phone from improper and unauthorized use.
You may be required to enter one of the following security codes as shown below. When the phone prompts you for one of these
codes, use the keypad to enter the appropriate number and press Left Softkey to confirm.
• PIN code (provided by your Network to protect your SIM card if it is stolen)
• PIN2 code (provided by your Network for charge information and FDN services protection)
• PUK/PUK2 code (respective personal unblocking code in case you forget the PIN/PUK code)
• Phone code (provided along with the phone and have to be entered at the first security setting)
Change PINs
The PIN will be requested most of the times when the phone is switched on. This feature can be deactivated, at the risk of
unauthorized usage of your phone. Some mobile service providers do not permit deactivating of this control.
You can set up your phone to require your
PIN code
entered at power up before the phone can be used. If not, not even
received calls can be answered. If you entered your
PIN code
incorrectly more than three times (not necessarily in the same
session), the correct PIN code will be unable to work for the subsequent tries and you will have to contact your mobile service
provider for a
PUK code
to unblock your SIM card.
To activate PIN Control
• With the standby screen displayed, press Left Softkey, 1 and 6 to display the
Security
menu screen. Press 2 or highlight
PIN Control
and press Left Softkey to toggle PIN Control On/Off. A tick in the Check Box beside the option indicates that
PIN Control
has been activated. You will have to key in the
PIN code
to activate PIN Control.
PIN / PIN2 / Phone code Change
• With the standby screen displayed, press Left Softkey, 1, 6 and 1 to display the
Check PINs
menu screen.
• Use the Up and Down keys to highlight the
PIN
/
PIN2
/
Phone code
to be changed.
• Key in the current code. You will be prompted to enter the new code when the correct current code is entered. Enter the
new code again as confirmation.
Security Settings
These confidential numbers
should be kept in a safe place for
future access, if required.
If the PIN2 code is entered
incorrectly 3 times, you will need
to contact your service provider
for a PUK2 code.
The PIN codes and security
codes are between 4 to 8 digits.
Your phone supports advanced
features (e.g. FDN) that may
require a PIN2 code to be
entered before they can be
accessed or modified.
The Phone code is used to
unlock the PIM functions and the
default setting of the Phone code
is 0000.
NEC.book Page 39 Monday, May 10, 2004 2:46 PM