User's Manual

31
Ring volume
To change the Ring volume settings, press 3 to display the
Ring volume
screen.
• Highlight the type of calls to change and press Left Softkey to select:
Other calls
/
Alarm
/
Messages
.
• The Ring volume level screen is displayed. Use the Up key to increase or Down key to decrease the volume setting to the
level required (the level bar moves in the direction corresponding to the key pressed) or press a number key (on a scale of
0 to 5) for the volume level.
• Press Left Softkey to save the current ring volume setting and return to the
Ring volume
screen.
• Press Right Softkey to reject any ring volume changes and return to the
Ring volume
screen.
• Press End Call to reject any ring volume changes and return to the standby screen.
Key tone
To change the Key tone settings:
• Press 4 to display the
Key tone
screen.
• Use the Up and Down keys to highlight one of the following:
Tone2
/
Tone1
/
Off
• Press Left Softkey to select and turn on the radio button for your selection.
• Press Left Softkey to accept the changes and return to the previous
Profiles
settings menu.
• Press Right Softkey to reject the changes and return to the previous
Profiles
settings menu.
Info Tones
To change the Info tone settings:
• Press 5 to display the
Info Tones
screen.
• Use the Up and Down keys to highlight the type of Info tones you want to change:
Warning tone
/
Cell Broadcast
/
Message Sent
.
• Press Left Softkey to toggle between On (a tick appears in the Check Box) and Off (the tick disappears).
• Press Right Softkey to accept the changes and return to the previous
Info Tones
settings menu.
Vibrator
To change the Vibrator settings:
• At the
Profiles
setting menu, use the Down key to highlight
Vibrator
and press Left Softkey to toggle vibrator between
On (a tick appears in the Check Box) and Off (the tick disappears).
Illumination
To change the
Illumination settings:
• Press 7 to display the
Illumination
screen with radio button selections to illuminate the following: to turn it
Off
, to
illuminate
LCD
only or to illuminate both the
Keypad & LCD
.
With the illumination always
on, the battery life is reduced.
NEC.book Page 31 Monday, May 10, 2004 2:46 PM