User's Manual

30
Profiles Settings
When a profile is selected, some of your phones settings will be altered accordingly to the selected profile. The phone functions
that can be altered include:
• Mute (On/Off)
• Ring tones (for Other call/Alarm/Messages)
• Ring volume (for Other call/Alarm/Messages)
• Key Tone (Tone1/Tone2/Off)
• Info tones (On/Off for Warning Tone/Cell Broadcast/Message sent)
• Vibrator (On/Off)
• Illumination (Off/LCD only/Key & LCD)
• Auto answer (On/Off,only available for the Car mode)
Changing Settings of Profiles
To change the settings of a particular profile, use the following procedure.
With the standby screen displayed, press Left Softkey, 1 and 2 to display the
Profiles
menu.
Press the corresponding number for the required profile or use Up and Down keys to highlight the profile you want to change:
• Press 1 for
Normal
;
• Press 2 for
Meeting
;
• Press 3 for
Car
;
• or Press 4 for
Headset
.
Press Left Softkey to dispay the Option menu. Highlight
Change settings
and press Left Softkey to display the
Profiles
screen to make the following setting changes:
Mute
To mute all tones when the phone rings.
Ring Tones
To change the ring tone or ringer melody that will sound when the phone rings:
• Press 2 to display the
Ring Tones
screen. Highlight the type of calls to change and press Left Softkey to select:
Other
calls
/
Alarm
/
Messages
.
• Highlight the type of ring tones to use and press Left Softkey to select:
Embedded melody
/
Downloaded melody
/
Composed melody
.
• Highlight the desired
Ring tone
and press Left Softkey to select and return to the previous
Profiles
setting menu.
Any changes made to the Ring
Setting Options, while in a profile
are stored and used when that
mode is selected again.
When your headset is
connected, the volume levels
shown on your phones display
are for the headset and will differ
from those shown in the table on
the left.
Use the Up and Down keys to
move the highlight bar to the
previous or next item in a list.
To toggle an option On/Off:
On (a tick is displayed in the
check box beside the option)
Off (the check box beside the
option is empty)
NEC.book Page 30 Monday, May 10, 2004 2:46 PM