User's Manual

29
Personalizing Settings
To revert your phone to its default factory settings, press Left Softkey from the standby screen, then press 1 and 9. Press Left
Softkey to confirm resetting or press Right Softkey to return to
My Phone
menu.
To change the volume during a call, use the Up key to increase volume and the Down key to decrease volume.
When you are not making any calls, use the following procedure from the standby screen:
• Press Left Softkey, 1, 1 and 1 to display the Voice
Volume
screen with a volume slider.
• Use the Up key to increase, or use the Down key to decrease the volume level to the required level. Alternatively, you can
press a number key (on a scale of 0 to 10) for the volume level.
• Press Left Softkey to save the current setting and return to
My Phone
menu.
• Press Right Softkey to reject any volume changes and return to
My Phone
menu.
• Press End Call to reject any volume changes and return to the standby screen.
You can set your phone to operate in any one of four profiles in the Phone
Profiles
menu:
• Normal
• Meeting
• Car
• Handset
Profiles Selection
With the standby screen displayed, press the Up key to display the Phone
Profiles
menu. Alternatively, press Left Softkey, 1
and 2 at the standby screen to get to the same menu.
Use the Up and Down key to highlight a profile in the list. Press the Left Softkey to display the Option menu. You can choose to
either
Activate
the profile or to
Change settings
by pressing the Left Softkey when your selection is highlighted.
Reset Defaults
Voice volume
Phone Profiles
NEC.book Page 29 Monday, May 10, 2004 2:46 PM