User's Manual

You may be required to enter one of the following security codes as shown
below. When the phone prompts you for one of these codes, use the ke
yp
ad
to enter the appropriate number and press LSK to confirm.
• PIN code (provided by your network to protect your SIM card if it is stolen)
• PIN2 code (provided by your network for charge information and FDN
services protection)
• PUK/PUK2 code (respective personal unblocking code in case you forget
the PIN/PUK code)
• Phone code
(p
rovided alon
g
with the
p
hone and have to be entered at the
first security setting)
If you forget any of these codes, ALWAYS contact your service provider as
they are the ONLY source for your codes.
Change PINs
The PIN will be re
q
uested most of the times when the
p
hone is switched on.
This feature can be deactivated, at the risk of unauthorized usage of your
p
hone. Some mobile service
p
roviders do not
p
ermit the deactivation of this
control.
You can set up your phone to require
y
our PIN code entered when the
p
hone
is switched on before the phone can be used and receive an
y
incomin
g
calls.
If you entered your PIN code incorrectly for more than three times (not
necessarily in the same session), you will have to contact your mobile service
provider for a PUK code to unblock your SIM card.
To activate PIN
• From the main menu, select Settin
g
s > Securit
y
. Hi
g
hli
g
ht PIN activate
and press LSK to toggle PIN activate Enable/Disable. You will have to ke
y
in a PIN code for activation. A tick in the check box beside the option
indicates that PIN activate has been activated.
PIN/PIN2/Phone code change
• From the main menu, select Settings > Security > Code.
• Select either Change PIN/Change PIN2/Chg. phone code.
• Key in the current code. You will be prompted to enter the new code
when the correct current code is entered. Enter the new code again and
press LSK to confirm the new code.
• A confirmation screen is dis
p
la
y
ed momentaril
y
and the
p
hone returns
to Code display menu.
Phone lock
The Phone lock menu allows you to lock your SIM card from unauthorized
usage. If Phone lock is On, SIM data can be accessed only when the correct
PIN code is entered. To On/Off Phone lock, proceed as follows:
• From the main menu, select Settings > Security.
• Highlight Phone lock and press LSK to to
gg
le Phone lock On/Off. A tick in
the check box beside the option indicates that Phone lock has been activated.
You will have to key in a Phone code to activate Phone lock.
Bar calls
This feature allows you to restrict the followin
g
t
yp
e of calls made or received
on your phone. You will need a 4-digit password provided by your mobile
service
p
rovider to activate rin
g
. You ma
y
have to re
g
ister se
p
aratel
y
for each
type of ring.
• All outgoing (All outgoing calls, except emergency numbers 112 and 999
will be barred)
• Outgoing international (International outgoing - Onl
y
calls within the home
country can be made on the phone)
• Out
g
oin
g
international exce
p
t home
(
International out
g
oin
g
without home
country- International calls not permitted. However calls can still be made to
your home country when you're abroad)
• All incomin
g
(
All incomin
g
calls will be barred, includin
g
the forwardin
g
of
the calls to the mailbox)
future access, if required.
If the PIN2 code is entered
incorrectly 3 times, you will need
to contact your service provider
for a PUK2 code.
T
he PIN codes and securit
y
codes
are between 4 to 8 digits.
Your phone supports advanced
features (e.g. FDN) that may
re
q
uire a PIN2 code to be entered
before they can be accessed or
modified.
T
he PIN2 code is SIM card related
and may only be available from
your service provider.
The Phone code is used to unlock
the PIM functions and the default
setting of the Phone code is 0000.
Call your service provider to
activate international service
options.
Before leavin
g
y
our home countr
y
you should select preferences
such as call block or call transfer.
You will be charged for calls
forwarded to you while you are
roaming.
The FDN facility is network
dependent.