User's Manual

Basic calls and Phone use
You can make a call in the same way as a normal push-button
p
hone. Press ke
y
after entering the area code and phone number.
Dialing calls
•Enter the phone number in the standby screen and check the number on the
display.
•Press call key to dial the call.
•To end the call at any time, press power key to return to the standby screen.
During the call, the screen displays either the phone number dialed and a
connection graphic, or the name and picture ID of the called party if they have
been previously allocated to the number dialed.
The number dialed and its related information will be stored in the Dialed calls
list.
Each time a call is made after the Dialed calls list is full, the oldest call
information will automatically be replaced by the latest call made and be
p
laced
at the top of the list.
Accessing the dialed calls list
• Press call key to access the Dialed calls list.
Highlight the number to be dialed by pressing the up and down navi
g
ation ke
y
s
and press call key to start dialing.
• Press LSK to dis
p
la
y
the O
p
tion menu for the Dialed calls list. Select to either
Extract number, Copy to... the phonebook, Delete the individual number or
Delete all the numbers in the call list.
Accessing the other dialed lists
Press call key and the R and L navigation keys to access Received calls and
Missed calls.
Use the full STD area code
even if you are calling to a
person in the same town.
Ending a call
Press power key or close the phone flap. The phone returns to the standby
screen.
If you hold down power
key, your phone will be
switched off.
Receiving calls
When you receive a call:
The phone rings (if ring tone is set to ON).
The number of the callin
g
p
art
y
ma
y
be dis
p
la
y
ed on the screen if the caller has
activated calling line identification.
•The calling party’s number along with the name and caller ID picture may be
displayed if the caller’s information is already stored in the phonebook.
If the caller has withheld his/her caller ID, the message ”Restricted” is dis
p
la
y
ed
to show that the number is being withheld. If the network service provider
cannot identify the number, the message “Unknown” is displayed to show that
number is not known.
Accepting a call
• Press call key.
Rejecting a call
•Press power key or RKS or close the flap of your phone. The call will be
transferred to the voice mailbox automatically.
You can also choose to put your calls on hold or to activate Call waiting or Call
diversion. These options are dependent on your network and subscri
p
tion
p
lans
with your local mobile service provider.
If a call is received but not answered, the screen will display the caller’s
telephone number (and the name if it was previously saved in the
p
honebook
)
.
This information is stored in Missed calls.
Information of received and answered calls are stored in Received calls.
When
y
our
p
hone is receivin
g
MMS, the incomin
g
call si
g
nal
may be ignored. The caller
may be notified that the line is
currently unavailable.
You can set your phone to
answer a call b
y
p
ressin
g
an
y
key except power key. See
“Answer options” on page XX.
If you are making a call, the
phone gives priority to
receiving a call unless you
have already pressed call key.
Calling line identification is
subscription dependent. If
you have subscribed to the
service and the caller has
allowed his number to be
transmitted over the network,
the number of the caller or the
corresponding name