User's Manual

Changing the battery
Make sure the phone is switched off. Some settings, stored numbers, and
messages may be lost if the battery is removed while the power is on.
1. Press down the rear cover.
2. Slide the rear cover about 8 mm in the direction indicated b
y
the arrows.
3. Remove the rear cover.
4. Put the new battery into place in the direction indicated by the arrow,
making sure that the tabs of the battery fit properly into the notches in
the phone.
5. Lower the battery towards the phone to lock into place.
6. Place the rear cover about 8 mm awa
y
from the end with the notches and
slide the rear cover in the direction indicated by the arrows until a click is
heard.
T
he
g
reetin
g
s messa
g
e ma
y
not
be as indicated if an
y
locks have
been set or the wrong
SIM has been inserted.
When you switch off and switch
on your phone, the data in the
phonebook list and
Messages folder will take some
time to initialize before the
y
can
be properly displayed.
T
he
p
hone su
pp
orts a number of
languages and the keyboard
symbols have been chosen for
worldwide operation.
Powering on the phone
Switching the phone on
Press and hold power key for at least two seconds to switch on.
The screen is either blank, displays an animation, or displays a greetings
message during the powering on process. After the
p
owerin
g
on
p
rocess, the
phone displays the standby screen.
You may need to enter your PIN code or password.
Switching the phone off
Press and hold power key for at least two seconds to switch off.